Best Way to Clean a Shower Head
No matter what type of water pressure your home has, you may still have to deal with a shower that produces very little. Most often, this is not an issue with the pipes, even though you may think so. The truth is, most of the time it is simply that the shower head needs to be cleaned. One easy way to tell is to turn on the water and watch as the water comes out of the nozzles. Even if you are able to see water coming out of each jet, you could still have buildup that restricts the flow. If you notice that water doesn’t come out of each nozzle, there is no denying you need to clean it. The good news is; it doesn’t have to be a chore. Here are a few tips on finding the best way to clean a shower head.
The Tool Free Shower Head Cleaning Method
One of the easiest and most preferred ways is to avoid using the tools. You can do this by using vinegar, a plastic bag, and a rubber band. All you have to do is pour vinegar into the plastic bag and put it over the head, holding it with the rubber band. If you suspect it is severely clogged, you may also consider using CLR cleaner instead of vinegar. Leave the bag to sit on it for a few hours. You may choose to do it after your family has showered and before you go to bed. When you remove the bag, you will want to run water out of the nozzles for a few minutes to remove the vinegar or CLR from it. You should have more pressure and no clogged nozzles.
If you want to make sure that all particles are gone, you can run your finger over the nozzles, especially if they are rubber nozzles. This will further dislodge anything that may have built into a solid mass inside of it.
Using Tools to Clean Your Shower Head
In the event that tools are necessary; this is also relatively simple. You might need to use a wrench to take it off the supply water line. You can fill your bathroom sink with vinegar and water or CLR. Put it into the water and allow it to soak for a few hours. Before you put it back into the shower, you may want to use a toothbrush to clean the spray nozzles. By doing this, you will be able to flush out the entire unit with water and dump out larger pieces of buildup that may be clogging the head.
To reinstall, you will want to use Teflon tape to ensure there are no leaks, because you can lose water pressure that way as well. You do not have to run the shower to rinse it, but you may want to turn it on and ensure that it is working the way you want it to work when you have finished reinstalling it.
The Dirtiest Shower Head Cleaning Chore
In some cases, the issue may not be the spray nozzles. Some shower systems have an internal filter that can become clogged. In this case, you may have to literally take the head of your shower apart. You should refer to your owner’s manual for information on doing it without damaging it. In an effort to save money, many people are willing to take the time to do this, but more often than not, people will simply throw away the old one and replace it. The main reason for this is that there are so many options available at an affordable price, most people don’t feel like wasting their time and taking a chance on it still not working the right way. To replace your existing one, check out the best shower heads here =>